Stainless Cyclone

The camera locks in place and is suitable for both manual and automatic paint application on both sides. On both sides there are places for workers and manipulators who spray paint. The cyclone block is completely made of cold rolled sheets, painted and phosphated on the inside. It is made to collect paint.

Working principle:

The booth has been designed in such a way that the powder paint that does not fall on the part during painting, enters the suction channels located on the floor of the booth and is transferred to the cyclone by means of an exhaust. The paint that has descended into the tank, having passed through an automatic sieve, is transported to the recovery system and from there, with the help of injectors, it again enters the guns. Small particles of paint that cannot be reused are sent to the waste tank.

Recovery System

The powder paint collected under the cyclone and already sieved is automatically sent to the powder coating hopper (recuperator). The powder paint accumulated in the lower tank of the cyclone unit is sucked into the recovery unit by suction through the injector and deposited in the tank. This ensures that the ink is reintroduced into the system and the ink is not transferred manually.

Components: 100 liter hopper, shielded (mini cyclone). Suitable for connecting to 10 devices.